{"product_id":"30a-brushless-motor-electronic-speed-controller-3ch-digital-multi-servo-tester-rc-speed-controller-checker-esc-consistency-ccpm-master-for-rc-plane-helicopter","title":"30A Brushless Motor Electronic Speed Controller + 3CH Digital Multi Servo Tester RC Speed Controller Checker ESC Consistency CCPM Master for RC Plane Helicopter","description":"1. Parameters:\nCurrent: continuous 30A, instantaneous 35A\nVoltage range: 6V-12V\nMinimum starting voltage: 6V\nBEC type: linear\nBEC output: 2A\nPCB Size: 43*26*7mm\nWeight: 25g\nColor: yellow\n\nBlack wire length: 85mm\nRed wire length: 85mm\nWhite wire length: 190mm\nBlue wire length: 76mm\n\nWiring method\nBlack - negative\nRed - positive\nJR terminal White - signal\n3 X Blue - connect the motor\n\n2. Protective Function:\nAutomatically select 2 -3LIPO, the protection voltage is 6V and 9V\nAutomatic select NIMH, the protection voltage of each section is 0.8V\nSafe start, if the accelerator position is not correct, it is forbidden to start\nTemperature protection, stop when 110 degree appearance temperature\nOut of control protection, stop after 1 second without signal.\n3. Performance Description:\nUpper Speed Limit: Up to 300,000rpm for 2 pole internal rotation, 50,000rpm for 12 pole\nexternal rotation, and 42,000rpm for 14 pole external rotation.\n8KHz PWM control, use speed control curve.\nAuto throttle adaptation, suitable for more remote control devices.\nUsing BEC, MCU separates the power supply, the work is more stable.\n4. Setting Method:\n(1). Turn on the transmitter and push the throttle (for FUTABA series transmitters need to select REV for the throttle channel).\n(2). Connect the receiver and motor.\n(3). Turn on the power supply of the ESC, and if the transmitter is normal, it will have the following sound: (If the sound ends with a long \"di\" sound and there is no more sound, then check the reverse setting of the throttle channel of the transmitter.)\nB B means LIPO automatic protection\nBB BB means NIMH NICD automatic protection\nBBB BBB means brake selection\n\nThere are settings you need during the sound cycle. When you hear the syllable of the prompt sound, quickly pull the accelerator to the position.\nAt the same time, the motor will make a very sharp sound to confirm.\n\n\nServo Tester Description:\n\nType: CCPM Servo Tester, ESC or Servo tester\nOutput: ≤15mA (5.0)\nInput: DC 4.2-6.0V\nOutput signal: 1.5ms ± 0.5ms\nSize: 35*30*30mm\nWeight: 8g\nAdjustment modes: manual, automatic, and the median.\n\nFeatures:\n1. Can be easily detected and set the dummy bit server, jitter and median. Rotate the knob to detect the servo.\n2. Can be connected to two servos or ESC; MCU control, good stability, high accuracy. Turn the knob, steering can be detected.\n3. If you connect the electronic governor (brush or brushless available), you can get rid of the remote control device for manual control, for testing tone Speed or motor performance is very practical, no longer cumbersome connecting the remote control and the receiver.\n4. It is equivalent to a \"hand Dynamic Receiver \"feature, playing rudder knob analog transmitters.","brand":"Global Droner","offers":[{"title":"Default Title","offer_id":44118989996068,"sku":"B0G4QSPTV2","price":12.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/8411\/1396\/files\/71UCbZmdoWL._AC_SL1500_152bb85c-b7ff-4a44-bd61-4532bfaaaeed.jpg?v=1777344959","url":"https:\/\/globaldroner.com\/products\/30a-brushless-motor-electronic-speed-controller-3ch-digital-multi-servo-tester-rc-speed-controller-checker-esc-consistency-ccpm-master-for-rc-plane-helicopter","provider":"Global Droner","version":"1.0","type":"link"}